Soda Maker PERLA 2

Product detailed description

PERLA 2 Soda Dispenser is one of our luxury models with a stand, suitable for representative rooms, offices, restaurants, etc. The PERLA 2 soda dispenser, with a performance of 35 liters per hour, allows dispensing of 4 types of beverages - unchilled, chilled, lightly carbonated chilled, and carbonated chilled water. Its appearance will complement any modern interior. 

The water dispensing in the PERLA 2 soda dispenser is ensured by an electromagnetic valve. The operation is conducted via a very unconventional and impressive glass panel with backlit pictograms and buttons, located on the front of the device.

Advantages

• Easy operation
• Direct connection to the water mains
• Powerful antibacterial filtration – carbon filter with silver or hard water filtration to eliminate limescale buildup
• Progressive and modern design
• Robust construction
• Stainless steel housing
• Choice of 4 types of beverages

Technical specifications

• performance: 35 l/h
• dimensions w/d/h (mm): 270/505/1390
• height for bottle placement: 27 cm
• weight: 60 kg
• dispensing: unchilled, chilled, lightly carbonated chilled, and carbonated chilled water
• inputs: 1x CO2 (3/8" hose) + 1x water (3/8" hose)
• water: water mains - connection to a tap with a 1/2" thread (preferably within 5m from the soda dispenser), the water at the inlet must meet pressure and quality criteria
• gas: CO2 - pressure cylinder - internal height of the stand is 80 cm and weight 6 kg. A fully filled cylinder is enough for approximately 10,000 liters of carbonated water
• electricity:  standard electrical socket (within 1.5m from the soda dispenser) 220 - 240 W / 50Hz
• cooling compressor performance: 1/5 HP
• Maximum water pressure: 4 bar
  • If the water pressure exceeds 4 bars, it is necessary to equip the unit with a pressure reducing valve, we recommend reducing valve with pressure gauge 
  • If the water pressure exceeds 3 bars, we recommend purchasing Hunter pressure reducing valve 

The soda dispenser is supplied with a drip tray.

For connecting the soda dispenser, the following is needed:

Description:

1. 3/8-1/2 BSP male quick-connect fitting
2. 3/8-3/8 BSPT male-to-male coupling
3. H2O pressure reducing valve
4. 3/8-3/8 BSPT male-to-male coupling
5. H2O filter
6. Filter holder
8. 3/8" or 5/16" - 1/4" MFL quick-connect fitting
9. CO2 pressure regulator
10. Calibrated 3/8" or 5/16" hose

CO2 Cylinder for Carbonated Water:
The ideal size of the CO2 cylinder that fits inside the dispenser column is a 6 kg CO2 cylinder. A fully filled cylinder is sufficient for approximately 10,000 liters of carbonated water.

You should know:

• The CO2 cylinder and reducing valve are not included with the soda dispenser. You need to purchase Connection Kit for Soda Dispensers

CO₂ cylinder specifications:

• 2 kg - dimensions: 540 mm height, 104 mm diameter - approx. 280 L of sparkling water
• 6 kg - dimensions: 560 mm height, 178 mm diameter - approx. 845 L of sparkling water
• 10 kg - dimensions: 670 mm height, 200 mm diameter - approx. 1,410 L of sparkling water

Service exchanges are performed once every 6 months based on water consumption.