Soda Maker BS1

Product detailed description

The BS1 soda maker is designed for placement under a countertop or to be built into cabinets or kitchen lines. This type of soda maker is then connected to a dispensing stand and must be combined with a faucet. Choose from our offer. Thanks to the possibility of built-in installation, it is suitable practically anywhere - in a bar, pub, company, or home.

For installation in a cabinet, the soda maker has a covered condenser, so hot air can be vented outside through a hole in the cabinet floor (in other cases, the cover is removed). The BS1 soda makers must be combined with one of the faucets from our offer. The soda maker itself, with a performance of 17 l/h, allows for dispensing chilled water and soda.

Technical Specifications:

• performance: 17 l/h
• dispensing: chilled water and chilled carbonated water (depending on the faucet used, the number of beverages may vary)
• the size of the saturation vessel for carbonating water is 0.5l. The one-time withdrawal of carbonated water is 0.5l, then you must wait 10s and you can withdraw 0.5l again
• dimensions w/d/h (mm): 255 / 406 / 406
• weight: 23 kg
• possibility of built-in installation into furniture, a line, or under a table
• connection to faucets
• possibility of adjustment to a soda maker
• robust construction
• connection for hoses 3/8"
• cooling compressor performance 1/8 HP
• Maximum water pressure: 4 bar
  • In case of water pressure above 4 bars, it is necessary to equip the system with a pressure reducing valve. We recommend a pressure reducing valve with a manometer.
  • In case of water pressure above 3 bars, we recommend purchasing a Hunter pressure reducing valve.

For connection:

• water - water supply - connection to a faucet with a 1/2" thread (preferably within 5m from the soda maker)
• CO2 gas - pressure cylinder
• standard electrical socket (within 1.5m from the soda maker)

To operate the BS1, it is necessary to also purchase a faucet for dispensing!

Description

1. Quick connector h-thread 3/8-1/2 BSP
2. Quick connector h-thread 3/8-3/8 BSPT
3. Water reducing valve
4. 350CPS water carbon filter
5. Filter head
6. Quick connector Y-h 3/8
7. Quick connector h-thread 3/8-1/4 MFL
8. CO2 reducing valve
9. Hose 3/8
10. Quick connector j-h 5/16-5/16
11. Faucet designed for soda makers
12. Quick connector h-h 5/16-3/8
13. Hose 5/16
14. Set of electronic valves

We recommend purchasing accessories, connection kits, and operations that are not included in the soda maker's packaging. Installation, including transportation, can be provided by our authorized service AGRO AQUA PRO, s.r.o.

You should know:

• CO2 cylinder and reducing valve are not included with the soda maker

CO₂ cylinder specifications:

• 2 kg - dimensions: 540 mm height, 104 mm diameter - approx. 280 L of sparkling water
• 6 kg - dimensions: 560 mm height, 178 mm diameter - approx. 845 L of sparkling water
• 10 kg - dimensions: 670 mm height, 200 mm diameter - approx. 1,410 L of sparkling water

Installation is provided by our own service technicians throughout the Czech Republic and Slovakia.