Reverse osmosis Aquarium AQ RO 200
Code: 4244Product detailed description
Aquarium AQ RO 200 - aquarium RO membrane water filter with top filtration technology - efficiency 90-96 % (chemicals, nitrates, nitrites, heavy metals, sulfates, chlorine, ammonium ions, iron, manganese, and others). With this filtration, you will achieve clean non-toxic water even for the most demanding aquarium fish such as discus or marine fish.
The filter operates solely based on the input water pressure and no chemicals are used. Two reverse osmosis units are the best technology for water purification with maximum efficiency and performance. The system connects to the water supply (installation kit and hoses included) and is ready for installation immediately.
FOUR STAGES OF THE FILTRATION SYSTEM
- The first pre-filtration stage removes mechanical particles larger than 20 microns, as well as chlorine and organic compounds. This stage uses a granulated activated carbon (GAC inline filter) cartridge.
- The second and third filtration stages consist of a membrane 2x RO 100 GPD - up to 576 l/day.
- The fourth filtration stage further cleans the water from undesirable tastes and odors - a granulated activated carbon (GAC inline filter) cartridge.
We recommend servicing the cartridge replacement every 12 months or after 6,000 liters of water.
Technical parameters:
- system performance based on the membrane: up to 576 l/day
- filtration performance TDS (total dissolved solids) (NaClO): 90 to 95 %
- min/max input operating pressure: 2.2 bar to 8 bar
- input water temperature: from 2°C to 40°C
- input water hardness: Max. 4.5 mmol/l
- input free chlorine: Max. 0.4 mg/l
- input iron: Max. 0.3 mg/l
- dimensions: 35 x 20 x 15 cm
- four-stage filtration
- complete connection kit, hoses, and holder included
- Ratio of pure to waste water: 1/3 to 1/4 l
For connection, you need an inlet water connection and a waste connection. During filtration, unwanted substances captured by the waste water exit, which keeps the reverse osmosis membrane clean and unclogged.
Service replacements are performed once every 10–12 months.
Additional parameters
| Category: | Reverse osmosis |
|---|---|
| According to the type of filter: | Reverse osmosis |
| According to use: | For demineralization of water, For aquariums |
| Number of filtration stages:: | 4 |
| Filtration performance TDS (NaClO):: | 90 to 95 % |
| System performance according to the membrane:: | up to 576 l/day |
| Min./max. inlet operating pressure:: | 2.2 bar to 8 bar |
| Inlet water temperature:: | from 2°C to 40°C |
| Input water hardness:: | max. 4.5 mmol/l |
| Incoming free chlorine:: | max. 0.4 mg/l |
| Incoming iron:: | max. 0.3 mg/ |
| Dimensions:: | 35 x 20 x 15 cm |
| Ratio of clean and wastewater:: | 1/3 to 1/4 l |
Discussion
Be the first who will post an article to this item!