Iron and manganese removal filter FZM 30
Code: AQCSET362Product detailed description
FZM 30 Filter reliably removes unwanted iron, manganese, and heavy metals from water. It is suitable for locations where it is not possible to install filters of the OPZ type or Multi OPC filters, for example, due to lack of space.
Filter Usage
The FZM 30 filter for removing iron and manganese is recommended for use in areas where the water reaches maximum levels of dissolved iron of 2 mg/l.
We recommend installing a PX 80 micron mechanical pre-filter with a sludge valve before the filter.
The product is certified and designed for contact with drinking water.
Filtration Efficiency:
- Dissolved and colloidal iron - up to 90%
- Manganese - up to 50%
- Lead - up to 96%
- Copper - up to 96%
Filter Cartridge
VFZM 30 filter cartridge contains cation-exchange fibers made of Catalon material.
Technical Parameters:
|
Cartridge Lifespan |
20 – 50,000 l (depending on the iron content of the inlet water) |
|
Maximum flow rate through the filter cartridge |
83 l/min |
|
Recommended water flow rate through the filter |
10–40 l/min, depending on the amount of unwanted substances |
|
Water Temperature |
+4 to +60°C |
|
Concentration of Dissolved Iron |
max. 2 mg/l |
|
Depth/Width/Height |
235x180x605 mm |
|
Maximum Pressure |
8 bar |
|
Connection |
1" |
Additional parameters
| Category: | Iron and manganese filters |
|---|---|
| According to the type of filter: | For iron and manganese |
| According to undesirable substances: | Iron, Manganese |
Discussion
Be the first who will post an article to this item!